Staerk Neutral Cure Sealant N60
Color range
Staerk Silicone Sealant N60 is high quality one component, neutral room temperature curing sealant. This sealant have anti-fungus agent and its perfect for high humidity areas. It effectively seals most building materials: glass, coated aluminium, wood, glazed ceramic tiles, fibreglass, vitreous enamel and most laminated surfaces. Ideal for ceramic tile grouting and sealing around bathtubs, shower stalls, wall fixtures, rimless sinks, kitchen and bathroom fixtures.
-
Ceramic tile grouting
- Elastic waterproof seal of vinyl, tiles and laminated flooring to walls.
Granite, Marble, Laminated benchtops
- Creating waterproof seal between sinks and benchtops
- Joints between benchtops and splashbacks or tiles
- Sealing between cabinetry and walls or floors
Bathroom and Laundry areas
- Sealing and waterproofing bathtubs
- Sealing and waterproofing toilet suites and bidets
- Waterproof seal for the basins and vanities
Door & Windows Glazing
- Sealing and waterproofing glass to windows and door frames
- Waterproofing and bonding of glass shower enclosures to tiles
-
- GLASS, ALUMINIUM, ALL ALLOYS
- METAL, MIRRORS, GLASS FIBRE
- STONE, MARBLE, POTTERY
- TIMBER, RIDIG PVC, MOST PLASTICS
- CONCRETE, BRICKS, CERAMICS
-
Indoor / Outdoor
It is UV resistant, so it can be exposed to direct sunlight without compromising the performance of the sealant
Waterproof
This sealant locks out water and adheres to most surfaces to create a waterproof seal giving you peace of mind.
Superior Elasticity
It has up to +/- 30% movement capacity and 450% elongation which will absorb most movement without breaking down or cracking
Guarantee
Against cracking, pealing or crumbling under proper usage. We give the one of the longest and comprehensive guarantees in the industry.
-
Preparation
The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine wet rag or cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.
Aplication
Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor on an angle corresponding to the joint width. For a perfect joint finish use our STAERKS GENERAL PURPOSE MASKING TAPE by applying tape the full length of the joint on both sides leaving the desired gap you require. Place the cartridge into gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or jointer to clean off excess sealant. Remove the masking tape gently and if needed clean up the excess sealant one more timeStaerk Neutral Cure Sealant N60 is not suitable to be used as a structural glazing sealant or materials such as : copper, lead, zinc.
Cleaning
Clean while uncured with a turpentine cloth. After hardening remove the silicone sealant mechanically or with a the silicone remover.
-
- Non Toxicity when cured
- If medical advise is needed have product container and label at hand
- Read label before use
- Gloves and goggles must be worn during application
- If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15mins
- Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor.
- Ensure proper ventilation at workplace or curing area.
- Keep away from children.
-
- Protect from freezing, store in a cool dry place at room temperature.
- Product must be used within 24 months of purchase.