Silicone Sealant | Exterior
Color range
This belongs to the RTV-1 group of silicones, it has neutral curing and non corrosive properties to most building materials. Has excellent resistance to weather, quick speed of curing, excellent movement capability and little change of performance between (-40 C to 150 C). This product can withstand extreme environments like rain, snow and high exposure to the sun. It’s the perfect tool for outside use..
-
Roofing Systems
- For sealing and bonding of joins between flashings and roof panels or lap joins between roof panels itself
Gutters & Downpipes
- Creating lasting seal on all outside gutters and down pipes connections
Skylights
- Waterproof seal for glass to different substrates.
- Sealing between skylights frames and roof panels or flashings.
Brick & Concrete Blocks
- Joins on Bricks or Blocks to exterior cladding or windows.
- Repair of cracks in high movement areas for bricks or concrete.
PVC & Metal Flues
- Joints between connection and actual flues to outside exterior substrates
-
Exterior oxime silicone sealant bonds perfectly with all materials used in the exterior of buildings:
- METAL, ALUMINIUM, STAINLESS STEEL
- PVC, MOST PLASTICS
- BRICK, FIBRE CEMENT, MORTAR
- STONE, MARBLE , GRANITE
- PORCELAIN, CERAMIC, GLASS
-
Exterior
Sealant designed to meet the most extreme NZ environments. With its many properties, its perfect for outside use in the construction industry.
Waterproof
Strong bonding characteristics & adhesion to different materials creates a waterproof seal that will resist any movement and prevent leaks.
UV Resistant
Made from specialized materials for outside with the highest UV resistance. Sealant exceeds these requirements & performs excellently.
Guarantee
Against cracking, pealing or crumbling under proper usage. We give the one of the longest and comprehensive guarantees in the industry
-
Preparation
The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine wet rag or cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.
Aplication
Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the adaptor on an angle corresponding to the joint width. For a perfect joint finish use our STAERKS GENERAL PURPOSE MASKING TAPE by applying tape the full length of the joint on both sides leaving the desired gap you require. Place the cartridge into gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or jointer to clean off excess sealant. Remove the masking tape gently and if needed clean up the excess sealant one more time. Exterior Oxime Silicone Sealant is not suitable for food preparation area or for drinking water collection off the roof. Not to be applied on some rubbers and soft plastics (test recommended).
Cleaning
Clean while uncured with a turpentine cloth. After hardening remove the silicone sealant mechanically or with a the silicone remover.
-
- Non Toxicity when cured
- If medical advise is needed have product container and label at hand
- Read label before use
- Gloves and goggles must be worn during application
- If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15 mins
- Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor.
- Ensure proper ventilation at workplace or curing area.
- Keep away from children.
-
- Protect from freezing, store in a cool dry place at room temperature.
- Product must be used within 12 months of purchase.