MS | Sealant & Adhesive
Color range
STAERK MS is a adhesive and sealant suitable for many applications. Adheres to most common building substrates. Fully paintable. Available in cartridge and sausage in white, grey and black.
-
Bonding interior fittings and assembly work
For a wide variety of substrates including timber, glass, metals and plastics
Sealing tilt slabs & sealing air seals
-
- METAL, ALUMINIUM, STAINLESS STEEL
- WOOD, PVC, MOST PLASTICS
- BRICK, CONCRETE, MORTAR
- STONE, MARBLE , GRANITE
- PORCELAIN, CERAMIC, GLASS
-
Indoor / Outdoor
MS technology sealant has the best performance in all applications (inside /outside). Designed especially for demanding tasks
Weatherproof
With excellent UV and water resistance, superior elasticity & adhesion strength we made the toughest weatherproof product on the market.
Paintablet
The sealant can be painted with traditional water/ oil based paints, which is a rare tool for extra waterproofing of joins when painting.
Guarantee
Against cracking, pealing or crumbling under proper usage. We give the one of the longest and comprehensive guarantees in the industry.
-
Preparation
The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine wet rag or cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.
Aplication
Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor on an angle corresponding to the joint width. For a perfect joint finish use our STAERKS GENERAL PURPOSE MASKING TAPE by applying tape the full length of the joint on both sides leaving the desired gap you require. Place the cartridge into gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or jointer to clean off excess sealant. Remove the masking tape gently and if needed clean up the excess sealant one more timeStaerk Neutral Cure Sealant N60 is not suitable to be used as a structural glazing sealant or materials such as : copper, lead, zinc.
Cleaning
Clean while uncured with a turpentine cloth. After hardening remove the silicone sealant mechanically or with a the silicone remover.
-
- Non Toxicity when cured
- If medical advise is needed have product container and label at hand
- Read label before use
- Gloves and goggles must be worn during application
- If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15mins
- Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor.
- Ensure proper ventilation at workplace or curing area.
- Keep away from children.
-
- Protect from freezing, store in a cool dry place at room temperature.
- Product must be used within 24 months of purchase.