Staerk Acetic Cure Sealant N95
Color range
Silicone sealant N95 is a one component acetic cured product. It shows superior weather resistance, waterproof performance and high adhesion to most of the building materials: glass, coated aluminium, wood, glazed ceramic tiles, fibreglass, vitreous enamel and most laminated surfaces. Ideal for sealing around tiles, bathtubs, shower stalls, wall fixtures, kitchen and bathroom fixtures, glass windows, skylights, etc.
-
Ceramic tile grouting
- Elastic waterproof seal of vinyl, tiles and laminated flooring to walls.
Sealing connection joints between ceramic tiles, showers, baths
- Sealing between bathtubs and tiles
- Sealing Shower enclosures
- Waterproof seal for the basin and vanity
Doors and Windows
- Sealing and waterproofing glass to windows and door frames.
- Waterproofing and bonding of glass shower enclosures.
- For assembly and joining glass curtain walls in office spaces.
-
- GLASS, MIRRORS, GLASS FIBRE
- ALUMINIUM AND SOME METALS
- WOOD, PARTICLE BOARD, MDF
- CERAMIC, PORCELAIN, POTTERY
- MANY DIFFERENT PLASTICS
-
UV Resistant
This specialised sealer for glass was made to withstand the harshest NZ environments with extreme UV and temperature resistance (-40 C – 150 C)
Waterproof
With excellent adhesion strength and elasticity this waterproof seal will withstand high stress and severe conditions indoors and outdoors.
Mould Resistant
This RTV-1 sealant will prevent any mould growth which makes it superb for all glass applications in wet and humid areas.
Guarantee
Against cracking, pealing or crumbling under proper usage. We give the one of the longest and comprehensive guarantees in the industry
-
Preparation
The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.
Aplication
Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor on an angle corresponding to the joint width. Place the cartridge into gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or turpentine cloth to clean excess sealant. If you like to have a perfect joint finish use our STAERKS GENERAL PURPOSE MASKING TAPE by applying tape the full length of the joint on both sides leaving the desired gap you require. Place the cartridge into gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or turpentine cloth to clean excess sealant. Remove the masking tape gently and if needed clean up the excess sealant one more time. Staerk Acetic Cure Sealant N95 can’t be used for all marbles, granite, other alkalescent materials, and metals such as copper, brass, magnesium, Zinc or other electroplating metal materials.
Cleaning
Clean while uncured with a turpentine cloth. After hardening remove the silicone sealant mechanically or with a the silicone remover.
-
- Non Toxicity when cured
- If medical advise is needed have product container and label at hand
- Read label before use
- Gloves and goggles must be worn during application
- If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15 mins
- Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor.
- Ensure proper ventilation at workplace or curing area.
- Keep away from children.
-
- Protect from freezing, store in a cool dry place below 25 C temperature to prolong its service life.
- Product must be used within 24 months of purchase.